e

Control systems

Control technology

Stepper motor controller

Stepper motor controller

This plug-in card is suitable for controlling up to four stepper motors with clock and direction signals. The clock generators for the stepper motors can be operated in trapezoid or reverse curve modes....
h
Demagnetising

Demagnetising

Electrical magnetic clamps are highly suitable for gripping metallic parts. They nevertheless suffer from one small drawback: the parts become magnetised and the residual magnetism can produce a small...
h
Infrared light grid

Infrared light grid

The infrared light grid with up to 16 parallel ray beams with adjustable distances can be used to locate a number of passing items, e.g. on conveyors or drop distances. Transparent objects can also be...
h
Operating terminal

Operating terminal

This mobile handheld terminal is a simple, universal, robust operating device for data input and display. The function and appearance of the keypad can be freely selected according to application. ...
h

Measurement instrumentation

Weight checker

Weight checker

The weight checker controls the required target weight and immediately sorts out faulty parts. This creates an additional barrier which prevents the delivery of defective parts. A further advantage...
h
Collision sensor

Collision sensor

Thanks to the collision sensor damage of any kind can be prevented when handling sensitive parts. In case of a collision of a sensitive part with other parts or obstacles while being loaded, conveyed...
h
Laser location

Laser location

Laser location is a simple and reliable procedure to locate the position of objects in order to be able to handle them, e.g. to grip parts, pattern templates, sinter additives etc. This location method...
h
Laser thickness measuring

Laser thickness measuring

Each part undergoes contact-free laser testing before loading to ensure size accuracy and to reject parts exceeding tolerances. Measurement accuracy is < 10 µm!
h

Testing technology

Test station

Test station

The parts are supplied via a supply system to the station in a lying position (inclined plane). The downhill slope force causes the parts to roll into a rotation unit that rotates the parts through 360°....
h
Test station

Test station

This test station is used for the testing or examining of small hydraulic assemblies in the form of a lifespan test or for testing series devices. The test specimen (with pump and electric drive) is also...
h