e

Special machines

Palletising systems

Palesta NG 4.0

Palesta NG 4.0

PALESTA PSNG-40 is designed to automate the loading or unloading process. For a faster, continuous and smooth production process and an optimized loading and unloading process, we would like to offer...
h
Palesta 2502

Palesta 2502

The PALESTA 2502 palletisation device has a 5-axis linear system, which places the parts arriving from a loading belt onto a car until it is fully loaded. As an application example: “PICK and...
h
Palesta Scara

Palesta Scara

Palesta Scara is a palletisation device when speed and accuracy are paramount! the ultra-fast loading and unloading of parts on various platforms. Here, in place of a Cartesian XYZ movement system,...
h
Palesta Vision

Palesta Vision

Palesta Vision is a palletisation device that can identify, remove in the correct position and align parts on a car, permitting the precise supply of downstream working processes. Applications:...
h
Palesta Kippen

Palesta Kippen

Palesta Kippen is a high-speed loading device. It can take a large number of parts from a magazine in one processing step and feed a downstream conveyor. Applications: This system is used where...
h
Robosta 4504

Robosta 4504

The Robosta 4504 is an intelligent and highly flexible loading station that can be used anywhere for the handling and logistics of large items in medium to high quantities. Its versatility makes...
h

Assembly technology

Joint Assembly

Joint Assembly

The fully automatic joint assembly system SXGLM-80 is designed to assemble cardan shafts. The machine uses the bell, cage, hubs, and balls to assemble a cardan shaft. Depending on the design, protective...
h
Joint ball station

Joint ball station

The ball station is intended as part of the joint assembly. After the alignment and assembly of the cages and hubs, the parts arrive at the ball-in station, because here the balls are inserted into the...
h
Press-fitting Cable Lug

Press-fitting Cable Lug

The machine has been designed to connect several items, each consisting of a tab and a printed part, and to perform various tests. The plates and bolts can be loaded manually or automatically. The two...
h

Feeding systems

Feeding BST-160

Feeding BST-160

The placement machine BST-160 is designed to equip a vibratory grinding machine. The machine loads the grinding machine with workpieces using a robot. The placement robot removes the workpieces after...
h
Feeding BSS-220

Feeding BSS-220

The BSS-220 feeder is designed to equip a Sunnen honing machine. This is loaded with workpieces using a robot. The workpieces are transported into the machine by a conveyor belt and the loading robot...
h
Feeding BFS-230

Feeding BFS-230

The machine was designed to load and unload parts of a grinding machine.
h

Control and testing systems

Optical Inspection Unit

Optical Inspection Unit

The optical inspection "OIU-25" is used to accept parts from a robot and to check them for surface scratches, to mark them with the aid of a laser and then to hand them over to a palletizer....
h
Inspection Cell

Inspection Cell

The machine is designed to remove workpieces from wire pallets that are transported in transport trolleys and to inspect them. If the result of the inspection is positive, the parts are sent to the further...
h
Top Bottom Brush

Top Bottom Brush

The brushing station is integrated into the palletiser supply line. The parts (green parts) are gripped and brushed/deburred on both sides (above and below) during throughput.
h

Packing systems

Packing machine

Packing machine

The packing machine was designed to load a large number of parts into boxes, which are separated from intermediate floors in layers. The parts are fed on a conveyor belt that is not part of the system....
h
Crate Watchman

Crate Watchman

The machine was designed to pick up and stack empty metal boxes coming from a car wash. The stacks of crates can then be carefully removed with a suitable lift truck and placed on the floor
h
Box dispenser

Box dispenser

Empty boxes are taken from a stack of empties and brought to the filling area, where they are filled with an adjustable number of parts via a conveyor. The filled boxes are then stacked one on top of...
h

Transport systems

Transfer Unit

Transfer Unit

The transfer unit was designed to mark parts that run on a conveyor belt with a code and then to check this with a reading device.
h
Tandem lift

Tandem lift

Allows large height differences (from 600 mm to 1200 mm, e.g. between the press and the palletiser) to be bridged simply when loading parts! Two lifts (left and right) can also be used to ensure...
h
lifting and tipping truck

lifting and tipping truck

The lifting and tipping truck brings steel nets full of parts from one place to another. Thanks to the lift-tilt function, it is also optimally equipped for loading the bunker of an inclined conveyor.
h
Turn over unit

Turn over unit

The turn over unit allows parts to be reversed where necessary during the loading procedure. width 30-400 mm length 250-40000 mm
h
Conveyer belt

Conveyer belt

The arriving parts are distributed between two flows. This doubles throughput of parts during palletising!
h
Buffer belt

Buffer belt

The queuing band is a conveyer system for the intermediate storage of parts to avoid part jams during the loading procedure.
h
Cookies allow us to provide our services. By using our services, you agree that we may use cookies. Click here for further information.